There are two methods of installing the 1,400 lb. Model 7 Standard and the 1,500 lb. Model 8 Elite.
Click images for larger view
The first method is by utilizing the included angle iron that is conveniently mounted on the base of the wrecker for easy access.
Remove it from the base, slide it into the slots and position a fork lift as shown in the photo.
The angle iron also serves another useful purpose. If necessary, install the angle iron onto the rear of a towed tractor with strapping material to span the rear frame rails of a unit that has an open frame at the rear. This will ensure that your chains do not pivot past the frame rails allowing the towed tractor to drop. On most tractor frames this will not be required.
Method 2 "D" Ring Method
The second installation method is achieved by utilizing the heavy duty "D" Ring that is welded at a balance point on the Pro-Totes.
1705 South Olive St.
South Bend, IN 46613